Plug-in cable 830-2 for PROFIBUS, pre-assembled with two D-sub plugs 9-pin, 5 m
141.98€
Включая НДС
Артикул: 6XV1830-2AH50
SIMATIC NET, СОЕДИНИТТЕЛЬНЫЙ PROFIBUS-КАБЕЛЬ 830-2, С ДВУМЯ УСТАНОВЛЕННЫМИ 9-ПОЛЮСНЫМИ СОЕДИНИТЕЛЯМИ D-ТИПА С ОТКЛЮЧАЕМЫМИ ТЕРМИНАЛЬНЫМИ РЕЗИСТОРАМИ, ДЛИНА 5 M Pre-assembled cable for connecting PROFIBUS stations, for example HMI, to automation devices.Fault-free connection of terminal stations by means of pre-assembled connecting cables. Direct connection of a PG via the PG interface without interrupting the connection between stations.
Параметры
UV resistant | - |
Nominal cross section conductor | - |
Core insulation material | Other |
Core identification | Colour |
Flame retardant | No |
Armouring | Нет |
Circuit integrity | No |
Stranding element | Pairs |
Colour outer sheath | Other |
Category | Other |
Diameter conductor | 0.65 |
Screen over stranding element | None |
Screen over stranding | Foil + braiding |
Material outer sheath | Other |
Conductor category | - |
Permitted cable outer temperature during assembling/handling | - |
Permitted cable outer temperature after assembling without vibration | - |
Number of stranding elements | 1 |
Protective sheath | No |
AWG-size | - |
Number of cores | 2 |
Underground installation | Нет |
Halogen free (acc. IEC 60754-2) | - |
Insulation integrity in accordance with IEC 60331 | - |
Low smoke (acc. IEC 61034-2) | - |
Stranding | Bundle |
Outer diameter approx. | - |
Low smoke (acc. EN 61034-2) | Нет |
NVP value | - |
Halogen free (acc. EN 60754-1/2) | - |
Oil resistant (acc. EN 60811-404) | - |
Oil resistant (acc. IEC 60811-404) | - |
Conductor surface | Bare |
Longitudinal water blocking cable | - |
Radial water blocking cable | - |
Reaction-to-fire class according to EN 13501-6 | None |
Smoke development class according to EN 13501-6 | - |
Euro class flaming droplets/particles according to EN 13501-6 | - |
Euro class acidity according to EN 13501-6 | - |
Min. permitted bending radius, moving application with forced guidance | 75.0 |
Min. permitted bending radius, moving application/free movement | 75.0 |
Min. permitted bending radius, stationary application/permanent installation | 75.0 |
Specification core insulation | - |
Specification material outer sheath | Other |