SINAMICS control unit CU320-2 PN control unit
842.41€
Включая НДС
Артикул: 6SL3040-1MA01-0AA0
SINAMICS УПРАВЛЯЮЩИЙ МОДУЛЬ CU320-2 PN БЕЗ КОМПАКТ ФЛЕШ КАРТЫ Control Unit SINAMICS Control Unit CU320-2 PN for single-axis drives with the SINAMICS S120 converter system. The CU320-2 Control Unit with PROFINET interface (without CompactFlash Card) controls the Power Modules in blocksize format. DRIVE-CLiQ motors or Sensor Modules Cabinet-Mounted (SMC) can also be connected to the integrated DRIVE-CLiQ socket to permit the operation of motors without a DRIVE-CLiQ interface. With the Basic Operator Panel (BOP20), parameters can be changed directly on the device. The Basic Operator Panel can also be snapped onto the CU320-2 Control Unit during operation to perform troubleshooting procedures. The Control Unit is commissioned and diagnosed with the STARTER commissioning tool. For the Control Unit a CompactFlash Card is available and for the DRIVE-CLiQ port a dust protection sealing plug is available. SINAMICS – the integrated series of drives for every field of application.
Параметры
| Width | 50.0 |
| Height | 300.0 |
| Depth | 226.0 |
| With control unit | - |
| Number of digital inputs | 12 |
| Number of digital outputs | - |
| Number of analogue inputs | - |
| Number of analogue outputs | - |
| Supporting protocol for LON | - |
| Number of HW-interfaces industrial Ethernet | - |
| Number of HW-interfaces RS-232 | 1 |
| Number of HW-interfaces RS-422 | - |
| Number of HW-interfaces RS-485 | - |
| Number of HW-interfaces serial TTY | - |
| Number of HW-interfaces USB | - |
| Number of HW-interfaces parallel | - |
| Number of HW-interfaces other | - |
| With optical interface | - |
| Supporting protocol for TCP/IP | - |
| Supporting protocol for ASI | - |
| Supporting protocol for PROFIBUS | - |
| Supporting protocol for CAN | - |
| Supporting protocol for INTERBUS | - |
| Supporting protocol for KNX | - |
| Supporting protocol for MODBUS | - |
| Supporting protocol for Data-Highway | - |
| Supporting protocol for DeviceNet | - |
| Supporting protocol for SUCONET | - |
| Supporting protocol for other bus systems | - |
| Degree of protection (IP) | - |
| With PC connection | - |
| Supporting protocol for SERCOS | - |
| Supporting protocol for INTERBUS-Safety | - |
| Mains voltage | - |
| Mains frequency | - |
| 4-quadrant operation possible | - |
| Number of interfaces PROFINET | 2 |
| Type of converter | - |
| Number of phases output | - |
| Number of phases input | - |
| Integrated breaking resistance | - |
| Application in industrial area permitted | - |
| Application in domestic- and commercial area permitted | - |
| Max. output frequency | - |
| Max. output at linear load at rated output voltage | - |
| Max. output at quadratic load at rated output voltage | - |
| Relative symmetric net voltage tolerance | - |
| Relative symmetric net frequency tolerance | - |
| Supporting protocol for AS-Interface Safety at Work | - |
| Supporting protocol for DeviceNet Safety | - |
| Supporting protocol for EtherNet/IP | - |
| Supporting protocol for Foundation Fieldbus | - |
| Supporting protocol for PROFINET CBA | - |
| Supporting protocol for PROFINET IO | - |
| Supporting protocol for PROFIsafe | - |
| Supporting protocol for SafetyBUS p | - |
| Max. output voltage | - |
| Nominal output current I2N | - |
| Supporting protocol for BACnet | - |
| Degree of protection (NEMA) | - |