SINAMICS Control Unit CU305 PN control unit
789.47€
Включая НДС
Артикул: 6SL3040-0JA01-0AA0
SINAMICS S110 УПРАВЛЯЮЩИЙ МОДУЛЬ CU305 PN С ИНТЕРФЕЙСОМ PROFINET БЕЗ КАРТЫ ПАМЯТИ Control Unit SINAMICS Control Unit CU305 PN for the SINAMICS S110 servo converter. The CU305 Control Unit controls the PM340 Power Module via the PM-IF interface. For example, for diagnostic purposes, a BOP20 Basic Operator Panel can be snapped directly onto the CU305. Further, for extensive diagnostics and commissioning functions, an Intelligent Operator Panel (IOP) can be operated remotely on the RS232 interface. At the integrated DRIVE-CLIQ socket, DRIVE-CLIQ motors or SMC Sensor Modules (Sensor Modules Cabinet-Mounted) can be connected to operate motors without a DRIVE-CLIQ interface, too. The status of the CU305 is displayed via LEDs of different colors and it can optionally be operated with a memory card. Commissioning and diagnostics of the CU305 and the connected components is performed with the STARTER commissioning tool. A memory card is available for the CU305 Control Unit. SINAMICS – the integrated drive family for every field of application.
Параметры
| Width | 73.0 |
| Height | 195.0 |
| Depth | 71.0 |
| With control unit | - |
| Number of digital inputs | 8 |
| Number of digital outputs | - |
| Number of analogue inputs | 1 |
| Number of analogue outputs | - |
| Supporting protocol for LON | - |
| Number of HW-interfaces industrial Ethernet | - |
| Number of HW-interfaces RS-232 | - |
| Number of HW-interfaces RS-422 | - |
| Number of HW-interfaces RS-485 | - |
| Number of HW-interfaces serial TTY | - |
| Number of HW-interfaces USB | - |
| Number of HW-interfaces parallel | - |
| Number of HW-interfaces other | - |
| With optical interface | - |
| Supporting protocol for TCP/IP | - |
| Supporting protocol for ASI | - |
| Supporting protocol for PROFIBUS | - |
| Supporting protocol for CAN | - |
| Supporting protocol for INTERBUS | - |
| Supporting protocol for KNX | - |
| Supporting protocol for MODBUS | - |
| Supporting protocol for Data-Highway | - |
| Supporting protocol for DeviceNet | - |
| Supporting protocol for SUCONET | - |
| Supporting protocol for other bus systems | - |
| Degree of protection (IP) | - |
| With PC connection | - |
| Supporting protocol for SERCOS | - |
| Supporting protocol for INTERBUS-Safety | - |
| Mains voltage | - |
| Mains frequency | - |
| 4-quadrant operation possible | - |
| Number of interfaces PROFINET | - |
| Type of converter | - |
| Number of phases output | - |
| Number of phases input | - |
| Integrated breaking resistance | - |
| Application in industrial area permitted | - |
| Application in domestic- and commercial area permitted | - |
| Max. output frequency | - |
| Max. output at linear load at rated output voltage | - |
| Max. output at quadratic load at rated output voltage | - |
| Relative symmetric net voltage tolerance | - |
| Relative symmetric net frequency tolerance | - |
| Supporting protocol for AS-Interface Safety at Work | - |
| Supporting protocol for DeviceNet Safety | - |
| Supporting protocol for EtherNet/IP | - |
| Supporting protocol for Foundation Fieldbus | - |
| Supporting protocol for PROFINET CBA | - |
| Supporting protocol for PROFINET IO | - |
| Supporting protocol for PROFIsafe | - |
| Supporting protocol for SafetyBUS p | - |
| Max. output voltage | - |
| Nominal output current I2N | - |
| Supporting protocol for BACnet | - |
| Degree of protection (NEMA) | - |