Isolation monitoring relay for non-grounded (IT) networks up to 250 V AC, 15-400 Hz

Isolation monitoring relay for non-grounded (IT) networks up to 250 V AC, 15-400 Hz. 3UG45821AW30
221.21€
Включая НДС
Артикул: 3UG4582-1AW30
РЕЛЕ КОНТРОЛЯ ИЗОЛЯЦИИ ДЛЯ НЕЗАЗЕМЛЕННЫХ СЕТЕЙ (IT) ДО 250 В AC, 15 - 400 ГЦ И ДО 300 В DC, ДИАПАЗОН ИЗМЕРЕНИЙ 1 - 100 KOM УПРАВЛЯЮЩЕЕ НАПРЯЖЕНИЕ AC/DC 24-240 В, 22.5MM, 1 П КОНТАКТ, ВИНТОВЫЕ КЛЕММЫ Insulation monitoring relay with analog setting SIRIUS 3UG4 for monitoring non-grounded (IT) networks for insulation faults, e.g. in systems with strict requirements on availability (chemical industry, automobile manufacture, printing) in shipbuilding and the railway sector or in emergency power supplies. Worldwide use thanks to wide voltage supply range and international certificates. New predictive measurement principle allows very fast response times. Direct connection to networks with mains voltages of up to 690 V AC and 1 000 V DC by means of the 3UG4983-1A voltage reducer module The relay permits a permanent self-monitoring and manual test option. Reliable system diagnostics thanks to unambiguous error messages and connectable fault memory. Apart from devices for insulation monitoring of non-grounded alternating voltage networks, devices are also available for monitoring non-grounded DC and AC voltage networks, with screw terminals in each case. Available accessories comprise cover caps and a voltage reducer module for extending the range of measurement. SIRIUS relays - one range for every application.

Параметры

Width 22.5
Function For three-phase supply system
Height 78.0
Depth 100.0
Rated frequency 50
With detachable clamps Нет
Line capacity 10.0
Indication of insulation value Нет
Error registration possible Да
Type of electric connection Screw connection
Rated voltage -
Rated control supply voltage Us at AC 50HZ 24.0
Rated control supply voltage Us at AC 60HZ 24.0
Rated control supply voltage Us at DC 24
Response value impedance 1 1.0
Response value impedance 2 -
Voltage type for actuating AC/DC
Number of contacts as normally closed contact 0
Number of contacts as normally open contact 0
Number of contacts as change-over contact 1