Analog monitoring relay, resistance monitoring from 2 to 200 kohm

РЕЛЕ КОНТРОЛЯ (АНАЛОГ. РЕГ.) КОНТРОЛЬ УРОВНЯ КОНТРОЛЬ СОПР. ЖИДК. 2 - 200 КОМ ПРЕВЫШЕНИЕ И ПОНИЖЕНИЕ 24 V AC/DC DC И AC 50 ДО 60 ГЦ 1- ИЛИ 2-ТОЧЕЧТНЫЙ КОНТРОЛЬ TRIPPING DELAY 0.5 ДО 10S 1 CO КОНТАКТ ВИНТОВЫЕ КЛЕММЫ REPLACEMENT PRODUCT ДЛЯ 3UG3501-1AC20 Level monitoring relay with analog setting SIRIUS 3UG4 for level monitoring of conductive fluids to protect against overflow, dry running or leakage. Worldwide use thanks to wide voltage supply range and international certificates. Device replacement possible without rewiring, thanks to removable terminals Can be flexibly adapted to various conductive liquids through analog setting of the sensitivity. Upstream or downstream function is selectable By means of the adjustable tripping delay time, it is also possible to compensate for shaft movements. Other resistance sensors can also be connected, e.g. suitable photoresistors, temperature sensors, position encoders based on resistors etc. In addition to screw terminals, all the devices are also available with spring-type terminals for fast, maintenance-free and vibration-proof connection. Available accessories include individually shortenable two-pole and 3-pole wire electrodes for easy mounting from above/below, as well as bow electrodes for installation from the side to allow higher filling levels and minimal space requirements. Additional accessories, such as unit labeling plates, push-in lugs and cover caps, are standardized for all relays. SIRIUS relays - one range for every application.

Параметры

Width	22.5
Height	92.0
Depth	91.0
Cascadable	-
With detachable clamps	Да
Number of inputs for electrodes	1
Response value sensitivity adjustable	Да
Type of electric connection	Screw connection
Rated control supply voltage Us at AC 50HZ	24.0
Rated control supply voltage Us at AC 60HZ	24.0
Rated control supply voltage Us at DC	24
Max. permitted off-delay time	10
Min. adjustable off-delay time	0.5
Max. permitted operate delay time	10
Min. adjustable operate delay time	0.5
Physical measurement principle	-
Voltage type for actuating	AC/DC
Number of contacts as normally closed contact	0
Number of contacts as normally open contact	0
Number of contacts as change-over contact	1