Basic unit 3 SIMOCODE pro V PN Ethernet/PROFINET IO, OPC UA server/web server

БАЗОВЫЙ МОДУЛЬ 3 SIMOCODE PRO V PN, ETHERNET / PROFINET IO, OPC UA СЕРВЕР, PN SYSTEM REDUNDANCY, WEB СЕРВЕР, 100МБИТ/С, 2 РАЗЪЁМА RJ45, 4 ВХОДА / 3 ВЫХОДА СВОБОДНО ПАРАМЕТРИРУЕМЫЕ, US: DC 24V, ТЕРМИСТОРНАЯ ЗАЩИТА ДВИГАТЕЛЯ, ВЫХОДЫ - РЕЛЕЙНЫЕ МОНОСТАБИЛЬНЫЕ, ВОЗМОЖНО ПОДКЛЮЧЕНИЕ МОДУЛЕЙ РАСШИРЕНИЯMODULE Motor management system SIMOCODE pro V PN for extensive protection, monitoring, safety and control functions for asynchronous motors and detailed operating, service and diagnostics data for process control systems and control systems using the most common fieldbus systems. The variable and intelligent motor management system offers the possibility of implementing a large number of control functions, e.g. for pole-changing starters or positioner control, and functions independently of the automation system. In interaction with various expansion modules, it provides an extensive range of inputs/outputs, voltage and power recording, fail-safe disconnection of motors, precise ground-fault detection via the 3UL23 residual-current transformers, analog value monitoring and temperature measurement. Depending on the version, a wide variety of communication interfaces such as PROFIBUS, PROFINET, OPC UA, Modbus RTU or EtherNet/IP are possible. The system supplies detailed operational, service and diagnostics data – at any time or place. Worldwide approvals (e.g. IEC and UL/CSA), also for applications in hazardous areas (ATEX or IEC Ex) are available. Deployment with IE3/IE4 motors is supported. The SIMOCODE ES (TIA Portal) software is available for the configuration, commissioning, operation and diagnostics of SIMOCODE pro. The SIMOCODE pro block library for SIMATIC PCS 7 is used for the simple integration of SIMOCODE pro into the SIMATIC PCS 7 process control system. The SIMOCODE pro V basic units are available with 24 V DC or 110-240 V AC/DC control supply voltage. The operation requires at least one current/voltage measuring module and a matching 3UF793 connecting cable. These optional operator panels with or without a display, as well as various expansion modules, are available separately. Take a step into the future with SIMOCODE pro.

Параметры

Switching function	Mono stable
Number of analogue inputs	-
Number of analogue outputs	-
Number of binary inputs	4
Rated control supply voltage Us at AC 50HZ	-
Rated control supply voltage Us at AC 60HZ	-
Rated control supply voltage Us at DC	-
Degree of protection (IP)	IP20
Rated operation current Ie	-
Number of electronic outputs	0
Number of outputs, with contact	3
Type of interface	-
Type of electrical connection for auxiliary- and control current circuit	Screw connection
Rated operation frequency	-
Rated voltage Ue at AC 50 Hz	-
Rated voltage Ue at AC 60 Hz	-
Rated voltage Ue at DC	-
Input for analogue temperature sensor	-
Input for earth fault detection	Нет
Input for thermistor connection	Да
Voltage detection module	Да
Current detection module	Да
Type of connection system	None
Voltage type for actuating	DC
Degree of protection (NEMA)	-